Shanger.kz

Master Tilesh Namazbekov: When the Dombra Finds Its Voice

VoxPopuli, Karla Nur
Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

For National Dombra Day, Shanger.kz returns to the story of Tilesh Namazbekov, a maker of traditional instruments. In the Voxpopuli archive, we found an excerpt from the 2013 feature “Stories of Success: Great Things Begin Small” and decided to tell once again the story of a craftsman who has spent more than twenty years making dombras and other traditional instruments.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

In Tilesh Namazbekov’s workshop in Taldykorgan, wood begins to sound on its own even before it becomes a dombra. The master listens to every slat, matches the pieces by timbre, bends and glues them, and waits for the future instrument to find its own voice.

Мастер Тілеш Намазбеков работает над изготовлением домбры в своей мастерской в Талдыкорган, домбра, домбыра, Тілеш Намазбеков, мастер домбры, Талдыкорган, национальные инструменты, изготовление домбры, День домбры, казахская культура, музыкальные инструменты

The craft entered Tilesh Namazbekov’s life long before he opened a workshop of his own. His father, Rymzhan, taught practical crafts at a school and played a three-stringed dombra. After lessons, Tilesh stayed beside him, helping to make things needed around the house and watching wood become furniture, an instrument, or an ordinary household object. That was when he first began learning the dombra. An old newspaper article about the craftsman captured that connection in a few words: “Tärbiesi - äkeden,” meaning “his upbringing came from his father.”

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

Later, Tilesh enrolled in the art and graphic design faculty at the Abai Kazakh Pedagogical Institute in Almaty. There, he learned to work with wood and metal and studied the fundamentals of artistic craft. Yet the habit of listening to a material, working with his hands, and seeing a future form within wood had begun much earlier, at his father’s side.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

The small workshop smells of wood, lacquer, and glue. Clamps, blanks, thin wooden slats, and the bodies of future instruments lie on the tables. Some dombras are ready for sanding, while others are only beginning to take shape. Every piece passes through the master’s hands, from selecting the wood to final tuning.

“I make dombras, qobyz instruments and zhetygens, and I repair guitars too,” says Tilesh Namazbekov.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

His own workshop emerged at a difficult time. After the collapse of the Soviet Union, steady work disappeared, and many people turned to cooperatives and small businesses. In the early 1990s, Tilesh and his colleagues opened a small instrument-making enterprise in Taldykorgan. At the same time, he was teaching and trying to find a way to keep the workshop afloat.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

He bought his first materials with small loans of 100 to 200 dollars. The money went on glue, lacquer, wood, and everything else needed for the work. He carried his first finished dombras through the market in his arms, offering them to buyers from morning until evening.

“Back then, I carried dombras through the bazaar myself. Now people come to me; they know who I am. I hardly need advertising anymore,” he says.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

Over the years, his instruments have travelled far beyond Taldykorgan. His clients include private musicians, performers, ensembles, and people buying dombras as gifts. In 1992, 1994, and 1996, Tilesh took part in the national Ükili Dombra competition for instrument makers and received diploma awards.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

By his own estimate, he has made more than two thousand instruments over two decades of work. On average, the workshop can finish around ten instruments a month, but each one takes time: wood cannot be rushed.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

The most important part of a dombra, Tilesh explains, is the upper soundboard, or qapqaq - the lid of the instrument’s body. It largely determines the character of the future sound. For it, the master selects spruce or fir: density, grain, the absence of excess resin, and the way every slat responds to touch all matter. He takes the thin pieces in his hands and taps them one by one. One sounds muted, another rings clearly, and a third is too sharp. For a single soundboard, several wooden slats with similar timbre must be matched.

“We take ten pieces, listen and compare. They have to sound alike. If the wood is not right, it cannot be used for the soundboard,” he says.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

Inside the body, thin wooden components known as serppe, or braces, are installed. They support the soundboard and influence its vibration and, therefore, the instrument’s timbre. The thickness and density of the wood, the shape of the body - every detail changes the sound. Some dombras have a deeper voice, while others are more resonant and light.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

The master sets particularly successful instruments aside.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

“Sometimes the sound turns out unusual. We set a dombra like that aside for a kuyshi, a traditional instrumental performer, or for another artist. Musicians can tell at once when an instrument is special.”

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

The workshop also takes on expensive bespoke commissions. Dombras made from a single piece of wood can cost significantly more than standard ones. They are commissioned for solo concerts, as gifts, and for official events. Yet price matters less to Tilesh than what happens to an instrument afterward: who will take it in hand, which kuys will be played on it, and whether it will become part of someone’s musical destiny.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

Today, young assistants work alongside the master. One of them studied under Tilesh in the late 1990s, when the city trained musical instrument makers. Later, the programme at the vocational school was closed and replaced by technical specialities in greater demand.

For Tilesh, this is a painful subject. Good craftspeople are few in Kazakhstan, he says. The craft requires more than technical skill: it demands an ear, patience, an understanding of wood, and respect for the instrument.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

The master also has a creative dream of his own. He shows a sketch for a future composition: three dombras joined into a triangular form. It is meant to be more than a sculpture - a life-size work in which each dombra remains a fully functional instrument capable of producing sound. In this composition, Tilesh sees Kazakh culture, memory, and continuity.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

For now, another dombra lies on the workbench. The master carefully closes the body, secures the parts, and leaves the instrument to dry. Several stages still lie ahead: sanding, finishing, tuning, and checking the sound.

Instrument maker Tilesh Namazbekov working on a dombra in his workshop in Taldykorgan, Kazakhstan, dombra, Tilesh Namazbekov, dombra maker, Taldykorgan, Kazakh musical instruments, traditional instruments, National Dombra Day, Kazakh culture, craftsmanship, instrument making

A few days from now, the dombra will be ready. But its voice is already being born - in the dry click of wood, the precise movement of hands, and the silence of a workshop where every instrument begins its journey long before the first melody is played.


Share:

Comments

No comments yet. Be the first to comment!

Leave a comment